As an EE engineer, you want to have a clean work surface and high-performance instruments. When you use bulky benchtop instruments to build a test system, it often brings a lot of inconvenience.
To this end, MET has launched PXIe modular measuring instruments to perfectly meet your needs for a streamlined and efficient test system. "Compact, integrable, highly scalable, and excellent performance."
01 MDO Series-High Speed Oscilloscope
METER™MDO-054A/B series
PXIe Multi-Channel High-Speed Digital Oscilloscope Unit
The MDO-054 series oscilloscope is equipped with 4 analog input channels. Among them, the MDO-054A adopts single-ended input, and the MDO-054B adopts differential input. The sampling rate of each channel can reach 5 GSa/s, and the test bandwidth can reach 1.25 GHz. Equipped with 12-bit ADC resolution, it can accurately capture the subtle waveform details of complex signals. The input amplitude can be selected between 500mVp-p and 1000mVp-p. The MDO-054 adopts on-board large-capacity storage mode, with a record length of 625ms@5GSa/s (3.125Gpts), which can meet the needs of large-scale data acquisition.
Resolution ……… 12-bit
Sampling rate ……… 5 Gsa/s
Input Channels …… 054A:4-CH SE.
054B:4-CH Diff.
Input amplitude …… 500/1000 mVp-p(可选)
The MDO-054 series oscilloscopes can be configured with a variety of measurement application software, including oscilloscope software ScopeWave, spectrum analysis software SageWave, and high-speed interface consistency test suite Luna-Suite, which can fully meet various measurement needs.
ScopeWave Oscilloscope Application Software
Luna-Suite High-Speed Serial Interface Compliance Test Suite
SageWave Spectrum Analysis Application Software
The MDO-054 series oscilloscopes, with their excellent signal detection and analysis capabilities, provide powerful support for a variety of test scenarios, including high-speed interface time domain testing, power supply testing, ripple measurement, power device testing, IGBT dynamic testing, MIPI testing, high-speed interconnect testing, and signal integrity testing.
02 MDO Series-High Bandwidth Oscilloscope
MET Technology's MDO series oscilloscopes offer a variety of bandwidth options. If you need a larger bandwidth, you can choose the MDO-102 series or the MDO-401 series. They have larger bandwidths and higher sampling rates, and can be widely used in the fields of autonomous driving (ADAS, domain controllers, SerDes testing), AI computing (MIPI, DDR testing), high-speed interconnection (PCIe, USB, Ethernet testing), and signal integrity (High-Speed cable, backplane testing) and other scenarios.
PXIe High-Speed Wideband Digital Oscilloscope Unit
MDO-401 series oscilloscopes, single card single input channel. Among them, MDO-401A adopts 2.92mm differential input mode, and MDO-401B adopts SMP differential input mode. The sampling rate of each channel can reach 40 GSa/s, and the test bandwidth can reach 18 GHz. The input amplitude can be 500mVp-p, and combined with the front-end card, the input amplitude of 2Vp-p can be achieved. MDO-401 adopts on-board large-capacity storage mode, and the record length is up to 500ms@40 GSa/s (20Gpts), which can meet the needs of large-scale high-speed data acquisition.
Resolution ……… 8-bit
Sampling rate ……… 40 GSa/s
Input amplitude …… 500 mVp-p
Record length …… 500 ms @40 Gsa/s（20Gpts）
METER™MDO-102A/B series
MDO-102 series oscilloscopes, single card dual input channels. MDO-102A uses single-ended input, MDO-102B uses differential input. The sampling rate of each channel can reach 10 GSa/s, and the test bandwidth can reach 2.5 GHz. The input amplitude can be selected between 500mVp-p and 1000mVp-p. Combined with the front-end card, an input amplitude of 10Vp-p can be achieved. MDO-102 uses onboard large-capacity storage mode, with a record length of 625ms@10 GSa/s (6.25Gpts), which can meet large-scale high-speed data acquisition needs.
Resolution ……… 12-bit
Sampling rate ……… 10 GSa/s
Input Channels …… 102A:2-CH SE.
102B:2-CH Diff.
Input amplitude …… 500/1000mVp-p(可选)
Record length …… 625ms@10Gsa/s
（6.25Gpts）
MET Technology is committed to providing customers with high-performance and high-reliability test and measurement solutions. The PXIe modular measuring instrument product system is complete and has become a benchmark choice in the industry with its excellent performance and wide range of application scenarios. We look forward to your continued attention to the release of MET Technology's PXIe series products, and we will serve you wholeheartedly!
END
Share:
News Center
2025-03-20News Center
2025-03-05News Center
2025-02-20
10th Floor, Building N4, Suzhou 2.5 Industrial Park, Dongchang Road, Suzhou Industrial Park, Suzhou City, Jiangsu Province
Copyright © Suzhou MET Technology Co., Ltd.- All Rights Reserved Web design
